2007 Bayliner 175 BR - Sound Deadening Material
Sound Deadening Material Install
 Engine Cover |
 FATMAT SHIPPING BOX |
 COVER AND SHIPPING BOX (offers prospective on relative size) |
 Engine Cover |
 FATMAT REMOVED FROM SHIPPING BOX |
 PROSPECTIVE ON RELATIVE SIZE |
 FATMAT UNROLLED |
 FATMAT UNROLLED |
Basic Installation
Step 1: Prep the Surface
Clean the mounting surface with a quick-drying, residue-free solvent. Remove all dirt, grease, oil, wax, moisture and rust to ensure a permanent bond between the Fatmat material and the mounting surface.
Step 2: Size and Cut
Using a razor knife or scissors, cut the Fatmat sheet to the desired shape and size (you may find a cardboard or paper template helpful.) Remove the release liner from the back of the Fatmat and apply the Fatmat to the prepared surface. On large surfaces, remove the release liner in sections, working your way down and across the panel.
Step 3: Apply the material
Apply the Fatmat to the mounting surface with a Fatmat roller tool. Take the roller tool and work the Fatmat into all contours of the surface. Using a razor knife, poke holes in any air pockets that may have formed between the panel and the Fatmat. Work the air out with the roller tool or your hands. Eliminating air pockets ensures lasting adhesion to the panel and gives maximum damping effect.
SPECIAL NOTES: